Money Saving HVAC Tips

Below you will find a list of things you can check before calling your HVAC Company. We hope you find these money saving tips to be helpful!

 

  1. Entire System is Not Running

A lack of electric power is a common cause of system failure for a heat pump, AC unit, or even a gas furnace. Before calling the experts, reset all circuit breakers and check all fuses in the main electrical panel to be sure the unit has power running to it.

  1. Temperature Varies Greatly From Room to Room

This problem is an air distribution problem, not a problem with the AC, Heat Pump, or Furnace. The issue is caused by uneven airflow. To adjust the airflow, many houses are equipped with adjustable dampers inside the air supply ducts. Additionally, each register or vent is usually equipped with a damper to restrict the air entering that room. Try fully opening the dampers in rooms with deficient airflow while partially closing the dampers in other rooms.

  1. Airflow Leaving Room Vents Seems Weak

A dirty filter may be the cause of this problem. The inside blowers of AC, heat pumps, and gas furnaces use filters to remove airborne particles and dust from the air circulating throughout the house. The filter, which is located in the blower unit, naturally clogs; checking your air filter once per month is ideal. You can replace dirty, disposable filters and clean dirty, washable filters. Moreover, the washable filters should be cleaned with water and allowed to dry before re-installation. Without changing or cleaning your air filters, the entire system consumes more energy in order to maintain the desired temperature throughout the home.

  1. Water Leaks onto the Floor Around an Inside Unit

When AC units and heat pumps operate in the AC mode, moisture from the air condenses onto the inside coil. The system is designed to collect the water in a pan and transfer it out of the house through a drainage tube. Moreover, a dirty pan or a blacked drainage tube can cause water to overflow onto the floor. Removing the dirt or clog may fix the problem.

  1. Unit Freezes Up

Insufficient airflow or not enough refrigerant can cause AC units to freeze, and then stop working. If air is not coming out of the vents, first check to see if the fan is working. If the fan is running, check inside the unit for signs of ice around the coils. This problem is often caused by an extremely dirty filter or low refrigerant. When the filter is dirty, air cannot pass over the coils, and condensation freezes. To fix this, try replacing the filter. If replacing the filter does not work, there may be a refrigerant leak. Before calling an expert, turn the unit off and let the ice melt. The technician will be unable to diagnose or fix the problem unit the ice melts.

Do you have any money saving HVAC tips?

JAK Services® LLC was started in June of 2003 by David and Piper Horton. David and Piper have worked tirelessly to build a company that has a widely known reputation for integrity, fair pricing, and excellent service. JAK Services® LLC provides heating, air conditioning, electrical services, and appliance repair in Keller, Texas and the surrounding areas.